Monday, February 11, 2013

Top 8 Ways to Save Energy At Home

Upgrading your home to a more energy efficient living space is not only beneficial to yourself by saving money, but it also helps the environment as well. Looking at your high cost heating and electricity bills may motivate you to start a change within your house.

Remodeling requires some spending of your own money, but it is definitely well worth it for you and the planet. Here are ten ways you can save energy at home.

1. Insulation – The easiest and cheapest way to save energy is to insulate your house better. The roof is where most heat escapes, so this should be your main focus. The outside of your home can be insulated correctly by using caulk to seal cracks between sheathing, doors, and windows. Do the same inside by filling in gaps around windows, doors, ducts, floors, etc.

2. Ventilation – Make sure your rooms are well ventilated to regulate temperature. Check to make sure your windows and ceiling fans work properly to help draw heat out.

3. Tankless Water Heaters – Replace your bulky water heater with a smaller tankless one that requires less room and will use less electricity.

4. Upgrade Appliances – Energy Star appliances are approved to be energy efficient and can save you money every month on your electricity bill.

5. Placement Of Windows – If you are able to remodel and change your location of windows, choose the sun-facing side of the house so that you can take advantage of the free energy. Skylights are also a great way to let in natural light and save money on your heating/electricity bill.

6. Roofing – Choosing light colored shingles will provide you with the optimal energy savings. Dark colors absorb heat, so the light shingles will help keep your house cool during the summer time.

7. Fireplaces - Using a fireplace to generate heat within your house is a great way to stay warm without using any electricity.

5 Common Mistakes of New Energy Auditors

No doubt if you follow energy or environmental issues, you’ve heard over and over again that the least expensive way to tackle our energy difficulties is through efficiency. One report from the American Council for an Energy-Efficient Economy (ACEEE) suggested that $168.6 billion could be saved through energy efficiency by 2020. Still, some of those close to the ground have heard horror stories on how the whole process is sometimes carried out in real life.

Significant energy savings cannot happen without a comprehensive energy audit. Quality energy audits followed by sound retrofits result in substantial energy savings. Poorly executed energy audits, no matter how good the retrofit, result in lower-than-expected savings, wasted investment, angry building owners, and a bad name for energy conservation.

Studies have shown a wide discrepancy in actual savings after energy audits. While some projects have delivered energy savings of less than 10% of original energy costs, others have successfully delivered savings of 40% and more.

This divergence is not a mystery. Experienced energy auditors have learned to avoid the mistakes that lead to underperforming retrofits, disappointed customers and a struggling referral business. Persuading homeowners and businesses of the benefits of energy efficiency can often feel like an uphill battle; there is no need to add the barrier of a poor review by committing the mistakes others have made.

Mistake #1 – Underestimating Installed Costs and/or overestimating savings

One can reasonably expect that if they install energy efficient light bulbs, they will lower their energy bill. But exactly how much will they save and how much more do the efficient light bulbs cost?

How A Home Energy Audit Can Save You Money

Whenever your local electrician performs an energy audit, the principle that they follow is fairly simple. During the audit, they will check throughout your home to help identify the areas that are using electricity inefficiently. After they have pinpointed the wasteful areas, they can suggest and implement steps to remedy this. Most electricians are trained in the areas that are most common inefficient energy consumers and can conduct a home energy audit for you. While it may be tempting to try to do your own energy audit, you can expect much more accurate results and long-term solutions by hiring a professional.
One of the first things that your electrician will check is your lighting. They will start by examining your fixtures and the bulbs that are being used in each one. Because incandescent light bulbs are incredibly inefficient (they result in more heat than light), your electrician will recommend replacing them with much more energy efficient compact fluorescent or LED light bulbs. Although it may seem like a small step, replacing all of the incandescent light bulbs in your home with energy efficient alternatives can have a huge impact on your electricity usage.
In addition to examining the type of lights used in each fixture, an experienced electrician will also look at the purpose of the lights in each room. If a room can benefit from dimmer switches, timers, motion sensors or any other type of lighting automation technology, then it may be recommended to you. These types of technologies can help turn lights on and off only when needed so that you are not wasting electricity when you are out of the room.

Wednesday, February 6, 2013

5 Tips on How to Save Home Energy

In today's economy, every little thing you do that will lead to trimming off your expenses will go a long way. Check out the following 5 tips on how to save home energy to get you started on saving some money by cutting down on your bills. At the same time, you will also be doing your part in taking care of and preserving the environment.
1. Maintain your furnace properly. Keep it well lubricated, clean, and correctly adjusted. A well-maintained furnace will function much more efficiently and use lesser energy. This will significantly decrease the cost of operating it. Also, check your filter. You should clean it at least once every two months. If it is too dirty to clean, consider replacing it with a new one.
2. Get a programmable thermostat for your home. A programmable thermostat is very useful in helping you save home energy. You can save 2% of your home heating needs for each degree that you turn down your thermostat. With the use of a programmable thermostat, you can automatically lower your thermostat setting even when you are asleep at night or when there is nobody home.
3. Make the most out of your appliances. This goes especially for your washing machine and your dishwasher. As much as possible, always use these appliances with a full load. If you are looking for a new washing machine, choose a front loading model. This type of washing machine is much more efficient than other models. It actually decreases your laundry water consumption by up to 40% while decreasing your electricity consumption by up to 50%. Some dishwasher models on the other hand have an "energy saver" mode for air drying your items. If your dishwasher has this setting, use it.

Monday, February 4, 2013

Blanketing Your Water Heater



Heating your water is an expensive task that usually represents 20-40% of your utility bill.  Wrapping your water heater with an insulation blanket can save some of this money by slowing the rate of temperature drop as the water rests in your tank.  With the water staying hotter for a longer period of time, the water heater remains off more of the time and will save you money and energy use.

Not all water heaters need a blanket however, some energy-efficient models have a thick layer of insulation inside the tank that is sufficient enough.  Insulation blankets for water heaters less protected against heat loss are available at home centers and hardware stores.  You can install one in a few easy steps that requires a few cuts for fitting.  Some blankets are even manufactured to fit certain models and require no cutting at all.  For these blankets, you need to know your water heater size in gallons and usually the manufacturer.

Weatherstripping Your Doors



Doors are much easier to seal than windows as they have fewer moving parts.  To add weather stripping so it doesn't cause binding, it is best to even out the gaps around your door before starting.  If possible, shim the door hinges to create a uniform gap all the way around your door.

The weatherstripping you should use is the same used for windows. Plastic V-strips and spring bronze are great for the top and sides of the door.  You must use a different material for the bottom as you deal with heavy foot traffic.  There are special seals designed for door bottoms including door sweeps, door shoes and thresholds.

4 Common Problems In Energy Audits

Energy audits are a growing in popularity and energy auditors are popping up all over the country. Choosing a good energy auditor is the best way to save money, and gain efficiency. Good Denver energy audit evaluations and well executed repairs and changes will result in substantial energy savings. A bad audit, though will not provide monetary or energy savings. Knowing the difference between a good and poorly executed audit will help home owners make wise decisions when choosing a contractor. Below are some of the most common problems in energy audits.

Missing Improvements
Comprehensive home energy audits are crucial to suggesting the correct improvements for the home. Energy auditors can miss needed improvements for many reasons including rushing through the audit and insufficient budgets. Evaluating all aspects of a home's efficiency is imperative to a proper energy audit and doing so takes time.

Weak Improvements
An audit must clearly define the scope of the  proposed improvements for the home owner. Without a clear description of the scope of improvements chances are high that incorrect or incomplete scope will be put in place and the expected energy savings will not come to fruition.

Improvement life not provided 
Improvement life defines how how long the improvements will last. Having this information allows homeowners to make educated decisions with life-cycle costing information. If the improvement will take longer to pay back than the life of the improvement than the investment is not worth the cost of the improvement.

Incorrect Cost Estimates of Improvements
Underestimating cost of installations can be a huge mistake. An installed cost estimate of an energy audit often serves as the home owner's initial budget for the improvements and if the estimate is lower than the actual cost the homeowner may agree to take on too many retrofitting projects. If the cost estimate is too high the homeowner may abandon the projects all together leading them to continue to waste money on a faulty home energy system.

Make sure to ask your potential home Denver energy audit specialist. make sure to ask about these issues. Talking to potential contractors about their improvement suggestions and cost analysis process you will end up saving yourself from bad investments.