Three DIY Improvements That Lower Hot Water Costs

Your parents were right, paying more than you need for hot water is the same as pouring money down the drain. Making some small improvements to your home can help you save money on your energy bill. Whether it's cleaning a dryer vent, or fixing a leaky faucet, small investments can make big changes to your energy bill.

Aerators
Installing a faucet aerator is sure to save you money. Aerators work by mixing air into the water stream. The result is a high pressure stream of water that uses less water than a solid stream. An added benefit to aerators is that the aerated stream does not splash. In normal household use aerators installed on you kitchen and bathroom faucets can save the BTUs needed to heat several hundred gallons of hot water a year.The best aerators are rated for a flow of 2.5 gallons per minute or less for kitchen faucets and 1 gallon per minuet for bathrooms. Aerators are made to fit faucets with spouts that are threaded either on the inside or outside. Some aerators are available with a swivel feature to direct the stream where you wish. When installing a new aerator place the washer (this should be provided with your aerator) on the aerator and screw it on by hand.

Replacing Old Shower Heads

When you replace an old shower head with a newer low-flow head you can save an enormous amount on your hot water costs. The new shower head should be rated no higher than 2.5 gallons per minute. To install the new shower head, tape the jaws of a pipe wrench to avoid scratching the finish. Use the tapped wrench to keep the shower arm from turning while you unscrew the old shower head using an adjustable wrench or a second taped pipe wrench. The new show head will screw directly onto the shower arm unless it has a pivoting ball joint at the end. If your new shower head has a ball joint, you'll need a

Top 8 Ways to Save Energy At Home

Upgrading your home to a more energy efficient living space is not only beneficial to yourself by saving money, but it also helps the environment as well. Looking at your high cost heating and electricity bills may motivate you to start a change within your house.

Remodeling requires some spending of your own money, but it is definitely well worth it for you and the planet. Here are ten ways you can save energy at home.

1. Insulation – The easiest and cheapest way to save energy is to insulate your house better. The roof is where most heat escapes, so this should be your main focus. The outside of your home can be insulated correctly by using caulk to seal cracks between sheathing, doors, and windows. Do the same inside by filling in gaps around windows, doors, ducts, floors, etc.

2. Ventilation – Make sure your rooms are well ventilated to regulate temperature. Check to make sure your windows and ceiling fans work properly to help draw heat out.

3. Tankless Water Heaters – Replace your bulky water heater with a smaller tankless one that requires less room and will use less electricity.

4. Upgrade Appliances – Energy Star appliances are approved to be energy efficient and can save you money every month on your electricity bill.

5. Placement Of Windows – If you are able to remodel and change your location of windows, choose the sun-facing side of the house so that you can take advantage of the free energy. Skylights are also a great way to let in natural light and save money on your heating/electricity bill.

6. Roofing – Choosing light colored shingles will provide you with the optimal energy savings. Dark colors absorb heat, so the light shingles will help keep your house cool during the summer time.

7. Fireplaces - Using a fireplace to generate heat within your house is a great way to stay warm without using any electricity.

Blanketing Your Water Heater

Heating your water is an expensive task that usually represents 20-40% of your utility bill.  Wrapping your water heater with an insulation blanket can save some of this money by slowing the rate of temperature drop as the water rests in your tank.  With the water staying hotter for a longer period of time, the water heater remains off more of the time and will save you money and energy use.

Not all water heaters need a blanket however, some energy-efficient models have a thick layer of insulation inside the tank that is sufficient enough.  Insulation blankets for water heaters less protected against heat loss are available at home centers and hardware stores.  You can install one in a few easy steps that requires a few cuts for fitting.  Some blankets are even manufactured to fit certain models and require no cutting at all.  For these blankets, you need to know your water heater size in gallons and usually the manufacturer.